Date Added: 08.11.2011
CM038 Iscar Tool Advisor (ITA) within the CimatronE
Cimatron Users Benefit from Partnership with Iscar
Nov. 3, 2011
CimatronE now features Iscar Tool Advisor (ITA), offering enhanced machining efficiency
Givat Shmuel, Israel – November 3, 2011 – Cimatron Limited (NASDAQ and TASE: CIMT),has announced a partnership with leading cutting tool producer Iscar in offering the
Iscar Tool Advisor (ITA) application within the CimatronE CAD/CAM solution.
“This new development offers Cimatron customers the combined benefits of CimatronE’sfunctionality with Iscar’s machining expertise,” said Ira Bareket, Cimatron’s VP Sales and Marketing.
The ITA recommends optimal tools and cutting conditions based on manufacturing information providedby the programmer. This information includes machine power, adaptation, and depth and width of material
to be machined. CimatronE customers receive connectivity to the ITA online portal where they can define
the relevant manufacturing information and then load into CimatronE the ITA’s recommended cutters,
holders and cutting conditions. The customer utilizes ITA’s recommendations to create optimal NC procedures,
resulting in shorter machining time and longer tool life.
“Selecting the appropriate tools and machining conditions for a job is often far from optimal,” said Mr. Bareket.“NC programmers typically choose the tools and technologies based on their previous experience.
However, there may be other tools and technologies that can offer shorter machining times and longer tool life.
The combination of CimatronE NC with ITA offers programmers instant and the most up-to-date information
to achieve optimal results for the job at hand.”
The CimatronE-ITA innovation was first introduced at the EMO show in Hannover last monthand received significant praise from visitors.
CM039 CimatronE 5Axis - Dental Implants
CM040 Machining using CimatronE
The Helical Milling strategy is especially useful for milling all around steep cavities or cores, particularly with electrodes.
This video will demonstrate its use in achieving higher surface quality and shorter machining time.
CM042 Parting Analysis - A First Glance
The parting analysis allows mold makers to get a clear picture of a part's topology, assign parting directions
and locate undercuts immediately. This video will demonstrate this capability.
The Cut Insert tool enables the quick, automated creation of multiple inserts, allowing users to establish core
and cavity plates early in the design process. This video demonstrates the tool's effectiveness,
particularly in achieving early machining.
CM044 2blade impeller cut by DMU50
File: marketing\CM044-impeller_NC.rar
Click here to get the password
Date Added: 27.12.2011
CM046 E10 (partial) Mold Design Demo
Date Added: 27.12.2011
Date Added: 27.12.2011
Date Added: 02.03.2012
Date Added: 02.03.2012
Fast Parting for Molds in CimatronE. Watch how far we can get in under 9 mins with a fairly difficult part.
Date Added: 02.03.2012
Creating a CMM report within Cimatron. We can take into account 2D and/or 3D orbit value for the overburn on the electrode.
Date Added: 02.03.2012
Engraving is made easy in Cimatron E9. Tedious "chaining" is not necessary and it doesn't matter whether the contours are projected onto the face or sitting above or below them on a 2D plane. Cimatron will take care of the projection and allow for incremental depth of cut below (or above) the surface, stepping down at a specified amount per pass.
Date Added: 02.03.2012
Hard Milling alternative to grinding, while maintaining sharp edges on the shutoff corners.
Date Added: 02.03.2012
Automated Drilling in Cimatron v9. We don't believe in "automatic" machining. We apply your process to your pre-defined geometric ranges.
Date Added: 02.03.2012
Parametric import in CimatronE 10
Date Added: 02.03.2012
CM056 multi-z_stock_spiral.avi
This is one strategy for roughing in Cimatron, when constant chipload is required and climb only milling is required for long insert life. Notice that when full cutter engagement is required (Slotting) on account of geometry, the cut can be made in multiple passes in the Z.
Date Added: 02.03.2012
NC Verification in CimatronE
Date Added: 22.03.2012
CM 058 CimatronE run on Pinnacle 5x Indexing Machine
FILE: same as C36file.rar
Click here to get the password
Date Added: 02.05.2012
CM 059 CimatronE Catalogs for Tooling
CimatronE offers an extensive vendor catalog library and the ability to create user-customized catalogs.
This video shows how use of the catalog functionality can be maximized to shorten design time.
Date Added: 02.05.2012
CM060 CimatronE Tips - Single face selection modes
Date Added: 02.05.2012
CM061 CimatronE Tips - Layout Part
